Vacuum sealed compression bag -
2 ways to remove air out !
PACK:
Slide articles into the bag keeping them away from the travel end. Avoid
overstuffing.
Seal:
Squeeze and slide the E-Z Zip Slider from one end to the other. Ensure the
zipper is completely closed by repeating this step at least two times.
Compress by HAND:
Start at the zipper end and roll towards the valve end or simply push
straight down on the bag with your hands.
VACUUM use E-Z VALVE:
With Ultra Pack Max, simply turn on your vacuum and press the vacuum
hose against the E-Z Valve to remove the air. The E-Z Valve self-seals so
there is no cap required.
Vacuum through ZIPPER:
With Original Pack Max, close the zipper leaving a few inches open.
Insert vacuum hose through opening and position it in or between the stored
articles. Make a seal with your hand around bag and hose. Turn on vacuum
and compress. Keep vacuum running while removing the hose from the opening.
Close the zipper all the way.
